PDA

View Full Version : BadEIP_M-600_1.3.55-2 unlocking Korean units - again


badeip
23-10-08, 15:40
This is the second release of my modified version of the official 1.3.55 firmware.
DViCO has yet again caused problems for owners of Korean units, by preventing the 'XML hack' that I used in previous releases.
I have therefore developed a different method for setting the language, and embedded the functionality in my tvixconfig tool.
The web configuration interface has also been updated, by including a drop down menu where language can be selected.

Currently supported languages are:

- English
- French
- German
- Spanish
- Russian
- Chinese

Language can of course also be specified from the command line by executing tvixconfig directly:
<pre>root@TViX:~$ tvixconfig lang english
TViXConfig by Petter Wahlman, aka BadEIP
version: 1.3.55
reboot to activate the change.
</pre>
Fipd - the daemon responsible for allowing non-DViCO writes to the TViX display (RSS feeds etc.) has been updated to display the clock.

To enable fipd, uncomment the # before this line in /mnt/jffs2_apps/tvix/main:
<pre>
#/mnt/jffs2_apps/tvix/main_exec /mnt/jffs2_apps/tvix/opentvix/usr/sbin/fipd &
</pre>
Contents:

Firmware version: M-600_1.3.55

SSHd (http://en.wikipedia.org/wiki/Ssh) (username: root, password: opentvix)

smbd (http://en.wikipedia.org/wiki/Samba_software) (username: root, password: opentvix)

- There is one share called “root” which exports the entire TViX file system, in addition to the auto-mounted tvixhd1 share.

Web (http://en.wikipedia.org/wiki/Http) configuration (audio, video, network, misc)

Enhanced Ctorrent (http://en.wikipedia.org/wiki/Ctorrent)

NTP (http://en.wikipedia.org/wiki/Network_Time_Protocol). Network Time Protocol - configured to synchronize the clock at startup to remedy the hardware clock issue

[Several] (http://www.binary-art.net/?p=420) additional utilities

Some excellent graphics by Eonnemisis See this (http://www.mpcclub.com/modules.php?name=Forums&amp;file=viewtopic&amp;t=14798) thread for other examples.

Unlocking of Korean units (configured through the Web interface).

<del>FIPd.Front Interface Panel daemon.</del> (http://www.binary-art.net/?p=626)

IRd. IR (http://en.wikipedia.org/wiki/Infrared) daemon. Allows sending receiving or remote control commands

RSSTvixer (http://www.binary-art.net/?p=654). Display RSS feed in the LCD of the most recent firmware from www.binary-art.net (http://www.binary-art.net) (inactive unless fipd is enabled)

IRSet (http://www.binary-art.net/?p=577). Command line utility for executing remote control commands

IRSnoop. Command line utility for displaying commands issued by the remote control

Tclsh (http://tcl.sourceforge.net/) to ease web development

Nano (http://www.nano-editor.org/) editor for those unfamiliar with the vi editor

Web based file browser by John



Changelog:

Added support for changing the language with tvixconfig

Updated the web gui to support the new functionality in tvixconfig.

* Language can now be set with a pull down menu.

Added a missing msntp argument

Fixed samba issues:

* The audio- and video shares should work again

* The secondary DViCO smb.conf is also updated to ensure that the configured shares aren't deactivated

Added shortcut to the navigation menu

Fipd (if activated) is now able to show the clock
<pre></pre>
For answers to common questions, see my [Firmware FAQ] (http://www.binary-art.net/?page_id=337)


Download the firmware here:

http://www.binary-art.net/?p=891



Regards,



badeip

badeip
24-10-08, 00:53
There has been some issues with language unlocking.
I will keep this (http://www.binary-art.net/?p=891#comment-191) post updated with information.


badeip.