View Full Version : Hauppauge MediaMVP-HD - First announced Sigma 8654 player...
While browsing the web, i found out about Hauppauge futur offering this summer: the MediaMVP-HD (presented at CeBit)
Interface looks quite uninspired :s
a bit of info:
Board: The box uses a Sigma 8654
Video: Component Video, S-Video, Composite and HDMI outputs
Audio: Left audio, Right audio and Toslink Digital Optical audio output
LAN Network input (not sure if gigabit or not)
OS: Linux and Samba based
It can be a standalone (it does not need a PC to boot like the previous MediaMVP did).
source (and more images): http://www.highdefforum.com/computers-htpcs/91528-hauppauge-mediamvp-hd-lan-media-player.html
Very intresting, ugly kiddish control ugly box!!!
Interface total wipeout
I dont think this a true player as in I doubt it is that advance as one might think
"MediaMVP-HDís CPU engine (a Sigma 8655 processor) runs the Linux operating system, and has built-in multimedia hardware for decoding high definition MPEG-2 and H.264 videos, digital audio and digital pictures. The MediaMVP-HD application can be reloaded through itís Setup menu.
MediaMVP-HD contains a built-in uPnP client, where the server can be a uPnP server such as Windows Media Playe from a Windows 7 PC. Some Windows XPs have third party uPnP servers installed and can be used to connect to the MediaMVP-HD. The PC can be used for normal tasks while acting as the uPnP media server.
MediaMVP-HD decodes full HD resolution NTSC and PAL encoded MPEG-2 or H.264 bit streams in real time, up to and including 1080p. Video formats supported include MPG, MPEG, MP4, M2TS, AVI, VOB and TS. "
MediaMVP-HD decoder specification
Dedicated hardware decode support for MPEG-2 Transport and Program Stream up to 1080p, H.264 streams up to 1080p
Video output: HDMI, Component high definition out. Composite, S-Video standard definition out.
HDMI formats: 1080p, 1080i, 720p, 720i, 480i, 480p. 120Hz, 100hz, 60hz and 50hz.
Outputs NTSC and PAL video, software selectable.
Volume adjustment for all audio outputs
Briteness, contrast and saturation adjustment.
MediaMVP-HD file formats
MPEG-1, MPEG-2, MPEG-4, H.264 SD or HD
H.264 in MP4, MT2S or MKV
Divx SD and HD
MediaMVP-HD audio decoder specification
Two channel audio output.
Optical audio out (5.1 channel)
Included in the MediaMVP-HD package
MediaMVP-HD digital media receiver device
Wall mounted power supply
MediaMVP-HD remote control with batteries
MediaMVP Installation Guide
1 meter HDMI cable
1.5 meter Ethernet cable
Approximately 6 watts when playing HD video from network
Power supply: 5v at 2amp
model 01340: MediaMVP-HD for wired Ethernet .networks (10Mbit or 100Mbit Ethernet)
PC System RequirementsWindows 7, Windows Vista or Windows XP. Shared folders or uPnP.TV Set RequirementsMediaMVP supports TV sets with HDMI (up to 1080p), Component video, S-Video or composite video.Audio input: HDMI audio, right and left audio in or optical audio.Network RequirementsEthernet network (wired)One 10/100 RJ-45 port on a Hub, access point or Switch.
It seems that this box might become interesting (http://forum.wdlxtv.com/viewtopic.php?f=24&t=7017#p58968) again
vBulletin® v3.8.4, Copyright ©2000-2015, Jelsoft Enterprises Ltd.