View Full Version : Can not fine NFS/Samba uring 4.22
phantomblue
01-11-10, 04:17
I just upgraded hdx-bd1 to 4.22.
I connected my mybookworld II and hdx-bd1 to WRT610N.
I started Samba and NFS server on mybookworld II.
But my hdx-bd1 seems can not find these two server over the net.
It used to work before. Any suggestions?
I just upgraded hdx-bd1 to 4.22.
I connected my mybookworld II and hdx-bd1 to WRT610N.
I started Samba and NFS server on mybookworld II.
But my hdx-bd1 seems can not find these two server over the net.
It used to work before. Any suggestions?
Do you have a gigabit connection? There are known problems with gigabit support.
phantomblue
02-11-10, 02:13
Yes. When connected to WRT610N, it's GBit network.
What's know issues? Can not find Samba/NFS automatically?
I also use Gigabit LAN on a SMC router and no problems with the connection and network shares in Samba and NFS (but read only - see my post http://www.mpcclub.com/forum/showthread.php?t=25468).
Try to check your settings on player (if you did not change any settings on your WDMBW - assume that it worked before with the same settings).
Go to Settings - System settings - Auto startup list and verify that Auto detect to add Samba servers and Autodetect to add NFS servers are ticked, then OK.
Now restart your player or go to Restart SAMBA/NFS service and tick the same two options as above (Autodetect ...) and push OK.
You should see your network share.
Hope it helps.
Yes. When connected to WRT610N, it's GBit network.
What's know issues? Can not find Samba/NFS automatically?
It seems that some gigabit users are having issues. You can try by putting a 100mb switch in between. Just in case.
vBulletin® v3.8.4, Copyright ©2000-2013, Jelsoft Enterprises Ltd.