NTSC Error 15 fixed version?

[jonny123]

I thought I'd ask, since there are some NTSC users out there... and there should be and will be more...

Can a noCRC Error fixed version of Dracula 2.8.3 setup be made, too?

I could do the blind setup I suppose.. but I thought I'd ask ;)

thx Dracula/Hi-Jack et al.. -jonny/jonathan

[Hi-Jack]

I will make one now...
Check back in 30 mins.
In the mean time, read the "Special members" in the menu 8)

[Hi-Jack]

Done...

Download here and let me know if it works fine on your player:

Link moved to Downloads by Hi-Jack!

Don't worry, i tested it and it works fine.
Just want confirmation before adding it to the downloads and Matrix.

[jonny123]

Thanks Hi-Jack... You rock!

I'll try it in about 6 hours when I get home from work. I could have done the blind setup, but I thought I'd ask...

Thanks so much to you and Dracula for modifying and providing fine firmware! I've read the threads, and I'll not be surprised if it says 2.7.4
for the FW version when I check the installed version.

As for the HDD issue, it appears that on the initial setup fo the HDD fror my 500-->508 conversion there was a disk error and the 80GB disk never formatted/mounted properly in the first place. It seems I'll need to yank out the drive and "fdisk" it and remove all formatting/partitioning and try again with a 2.74 or newer FW install. Any other advice, I'm "all ears".

THANKS!
-jonny123/Jonathan

[Hi-Jack]

Not realy, sorry. I would suggest to get it out too myself.

I will move the download NTSC version to the download section and remove the link above!.
tested it twice now. Works fine.
Have fun!