Dear All,
I bought Kaiboer K200 at a local vendor which is at
http://www.haloshop.vn , at that time they was flash the k200 with popcorn A 100 firmware for Downmix the DTS and reading sub with UTF 8 .
I found that the lastest firmware of Kaiboer was support those things already. i did try to flash back K200 with recovery file as the instruction but i was fail
"Method:
1. Unzip both up5fw2TP.bin and boot-image.bin onto the ROOT of a USB thumbdrive and plug into K100/K200.
2. Connect by Component or Composite cable to your TV.
3. Power up the unit.
4. Wait for 3-5 minutes, then the Component or Composite video will display following colours depending on its recovery status:
RED - Required binaries on USB thumbdrive detected, starts recovery
WHITE DOTs - reprogramming
WHITE - Recovery success
(if YELLOW - means Recovery failed )
"
I tried as the instruction a couple of times but it showed yellow screen only after quick shot of red color at my Tivi LCD.
Please advice
Thanks a lot