[Stoni]

I am not able to choose partial or full update when booting with the 1.1.7 Firmeware CD. What do I wrong ?

[Hi-Jack]

Try burning another disk or boot from the disk multiple times.
Eventually it will allow the selection, seen it happen before...

[coolrunner]

did have the same problem .... had the firmware update burned on a cd-rw ... didn`t get the selection also

reburned it on a cd-r and it worked like a charm

and still have original dvd-rom in kiss player

[Stoni]

I tested it with 3 different CD's. Still the same problem. What can I do. The CD boot until the screen to choose the partial or full update. Then it is not possible to choose......

[PatPowerMan]

Maybe raffe's cool howto can help:

1. not important for you... 2. Burn the ISO file "as" a disc and make sure the following options are set in your burning program: a) "Disc At Once" b) "No Multi Session" c) "Finalize CD” d) Burn it at MAX 8-speed to CD-Rom (or CD-RW) e) Also check this guide: http://www.kiss-technology.com/?p=burn&v=users